See more Primers & undercoats
Zinsser Bulls Eye 1-2-3 White Multi-surface Primer, sealant & stain block, 1L
Zinsser Bulls Eye 1-2-3 Plus is a next generation universal water-based primer, sealer and stain killer. It is ideal for interior and exterior painting projects.
- Apply with a Brush
- Shake or stir well and apply using brush, roller or spray (follow spray equipment manufacturer’s instructions; use 0.017” tip at 2000–2500 PSI). If thinning is required add no more than 5% clean water. Apply between 10°C and 25°C, Relative Humidity < 85%
Features and benefits
Bulls Eye 1-2-3 delivers stain blocking performance normally only associated with solvent-based primers, including adhesion and stain blocking. It can be applied directly over water and smoke stains and effortlessly deals with hard to paint surfaces, like ceramic tiles, glossy surfaces, vinyl, metal, plastic and more.
- Contains a biocide that protects against fungal degradation
- Suitable for high-humidity areas such as bathrooms and laundry rooms
- Unrivalled adhesion
- Low odour, water-based formula
- Lightning quick drying time
- Ultra-low VOC
|Drying time||30 min|
|Litre capacity (ml)||1000ml|
|Location||Interior & exterior|
|Range||Bulls Eye 1-2-3|
|Recoat time||1 hour|
qtlyresh - 15 days ago
Great product, easy to use for a diy project. And will definitely recommend.
Jayney Black - 2 months ago
Covers really well and dries to a lovely matt finish. A lot goes a long way would thoroughly recommend this and won't do any painting in future without using this first to prepare the surface. Not cheap but well worth the money
JohnHop - 10 months ago
Purchased this to prime some old pine cupboards that had previously been stripped and waxed. Being water-based I was a bit sceptical, however having used Zinsser Products in the past I thought I would give it a go. When using this product I found it behaves similar to a solvent based paint.
Fabulous product with quick drying and re-coat times.
townygirl58 - 11 months ago
Wouldn’t buy anything else. It covers beautifully without the need for a primer.
Great primer for bathroom walls. A+
Frenchiex - 1 year ago
I am a big fan of the Zinsser primers, this brand comes recommended by pros and this one we got for the prep of the BATHROOM walls.
I lightly sanded the walls first, then washed them. Once dry, I applied one coat of this primer Plus to get rid of any old shine so I could proceed with my new colour scheme the next day.
The substance is more 'runny' than you'd expect from a paint and it is a little tricky for brushwork (it drips a fair bit) but it applies very nicely on a roller and 1 coat was good enough to 'block' the strong colour we had, as our next colour was much paler (Dulux Warm Pewter).
My bathroom is now finished and it was an easy job.
The primer dries nice and matt.
A small pot will got a long way depending on the size of the room of course. We got a 1l pot and have half a pot left.
The price is worth it as it could make your life easier for the main job and this is exactly why I got this primer.