See more Wastes, traps & overflows
Wirquin Pop-up Bath Waste & trap kit (Dia)40mm
This pop up bath waste and trap from Wirquin is Suitable for most baths, and comes with a water seal trap and stainless steel plug.
- Manufacturer guarantee - 5 years
- Suitable for Bath
Features and benefits
Contemporary chrome plated bath waste complete with overflow pipe and trap. unique open and close mechanism by pushing down the plug to open and close.
- Push to open and close mechanism for easy use
- Overflow 700mm
- Stainless steel plug
|Material||Plastic & stainless steel|
|Included||Water seal trap & stainless steel plug|
Difficult to make water tight
Cardiff customer - 7 months ago
If it wasn't for the fact I'd installed it, and it would be a pain to remove, I would have returned this to the store.
It is very difficult to get this water tight. The two joins around the trap, which come ready assembled, are very leaky and it is very difficult to get them water tight. I see that other reviewers have had the same problem.
Also, once assembled, the popup machanism feels very flimsy; I'm not confident that this will last very long at all.
Anonymous - 10 months ago
Yes the waste trap is cheap, a pain in the backside to replace and annoyingly shorter than the one it is replacing but they do the job.
The plug and plug hole are sound.
The gripe is with the cheap as chips rubber seal that sits around the bath squeezed between the plug hole surround and the overflow connecting piece - it is thin and if you mastic it will tear if you need to take it off. I used plumbers mait on the plug hole but nothing underneath and it leaks - so guess I will have to mastic it and hope it holds...
Oggers - 1 year ago
This product is beyond useless! I’ve been fitting baths for 15 years and this is by far the worst pop up bath waste I’ve come across. Looking now at previous reviews it’s clear b&q don’t care about customers feed back as it’s still on sale after 5 years of bad feed back.
Pop up waste with overflow and trap
VJB - 4 years ago
I felt I should re review this product because I have now fitted it successfully but the crux of the matter is poor instructions. It is directly compatible to solvent welded pipe which has to be welded into the outlet adapter (You have to buy or supply the solvent as extra). I found that pipe for push fit fittings will not directly be able to be solvent welded into the adapter as the pipe is of a smaller diameter. If you want to use push fit fitting a compression elbow (1 1/2" size) will have to fitted between a small length of solvent pipe welded into the outlet adapter and standard pipe for push fit fittings. The seals and compression fittings of the trap etc. are flimsy when compared to say standard compression fittings and its easy to jump the threads if you ever tighten. It looks OK though and is working fine now.
Rubbish Product Stay Away
Sam23 - 4 years ago
Been used for two weeks and has broken the plug cannot be opened now and have had to have a tradesman into replace this.
If you value your time and money do not buy this product.