See more Wastes, traps & overflows
FloPlast Kitchen sink waste kit, (Dia)40mm
Part of the drainage system, this bowl sink waste kit from FloPlast is made from hard-wearing polypropylene and has a compression fitting type. It's suitable for plastic pipes to bs 5254 and bs 5255, copper waste pipes to bs 659 and bs 2871, 32mm and 40mm.
BQ Flo fast sink waste ..
Duff104 - 10 months ago
Rubbish fitting .
Meant to be 40mm but it’s 40.5mm..
Does not connect to the other BQ waste fittings !..
Night mare ..
I am off to buy a normal 1 1/2 sink compression waste elsewhere, which I know will fit correctly.
Ian14 - 4 years ago
The sink kit was just what I needed saved me a lot of time.
Thank you B&Q.
Only needed one small piece
Buddhadiane - 5 years ago
Had to buy whole large set but only needed one tiny piece so it made it an expensive piece
localdiyer - 6 years ago
Ignore the picture. It isn't adjustable on the main sink unit connection. This meant that once connected to the main sink unit there wasn't enough space to connect to half bowl outlet as you have to add another section of pipe. both the sink connections also need to be the same