See more Ceiling lights
Colours Lari Traditional Matt White Ceiling fan light
- Bulb not included
- Only fixings included
- Guarantee - 2 years
Features and benefits
- This ceiling fan will provide a perfect airflow throughout a 5 square metre room
- The speed is adjustable in 3 settings
- White rattan effect fan blades
- Comes with reversible blades
- Summer and winter options allow you to use the ceiling fan all year round and feel comfortable
- Powerful quiet motor
|Material||Glass, MDF & metal|
|Maximum bulb wattage||60W|
|Number of bulbs||1|
|Number of fan blades||4|
|Reversible fan operation||Forward & reverse operation|
|Room use||Bedroom & living room|
|Switch type||Pull cord control|
Lukkki - 2 months ago
bought this one in B&Q cork....easy assembly...very efficient
I tried to get a second.......but all gone.....I CAN WAIT.
Unit shakes when using fan
Mindy290 - 10 months ago
This light with fan is very noisy and shakes as soon as you use fan
Anonymous - 1 year ago
I bought this last week and I think it’s brilliant and great value for the money.
SmartyP - 1 year ago
Instructions average but not rocket science to put together, really pleased with the quality And looks fab in the lounge! Very quiet too!!
Misleading Dimension on box & 'pig' to install
fanlightboy - 1 year ago
We purchased this fan to replace an existing fan in the conservatory - whch after 16 years stopped working. We measured the old fan and checked the dimension on the new fan in store - note from the front of the pack it appears to show that from the top of the fan to the fan blades is 43cm.
Following the instructions I fitted the fan motor and light fitting assembly to the ceiling. Fitting the fan blades to the motor housing after the motor / light fitting assembly is fixed to the ceiling is impossible, partilicularly with 'V' shaped roof, because the fan blades are screwed to the top of the motor housing and the restricted space makes it impossible to access the fixing screws.
Removing the fan motor and light fitting assembly from the ceiling and fitting the blades, means that a second person is required to hold the fan assembly as the electrical connections are made. This is when we discovered the problem that the fan blades were catching the ceiling, further investigation showed that the blades of the fan are only 18cm from the top of the ceiling fitting. We scratted around looking for a way to extend the tube to increase the distance between te ceiling and fan blades - nothing apparent. We then found a second drawing on the rear of the box that shows the overall height of the fan/light fitting is 43cm - there is no dimension for the distance between the ceiling fitting and the fan blades - MUCH CURSING! (The diagram on the front of the box is extremely misleading).
I had to make 5cm packing pieces to go between the fan motor and light fitting assembly to lower the height of the fan blades and stop them catching the ceiling.
The switch cords are very short and not labelled - (at 5ft tall my daughter could not reach them!). Cords had to be extended using cords from the old fan. When the cords are pulled to activate the fan or light, because the cords drape ove the edge of the lamp shade it has the effect of pulling the lamp / fan assembly to one side - not very satisfactory.
The other dissapointing feature is when the fan is switched on it starts at the highest speed - which is counter-intuative and the motor is not really quiet!
Overall dissappointing - at best it is functional - and looking at the quality of the build I doubt it will last anywhere near the 16 years of its predecessor!